A truck that breaks down on a highway in Assam or Kerala needs the right part, fast. Behind every quick repair is a chain of people who received that part, stored it in the right rack, picked it, packed it and shipped it to a dealer. For a large truck and bus maker like Eicher, this parts and materials work is a big operation in its own right – and it is one of the best entry points for 10th and 12th pass candidates who want steady work in the automobile industry without an ITI certificate.
This article focuses on stores, warehouse, packing and helper jobs connected to Eicher’s manufacturing around Pithampur and Indore in 2026: what the work involves, the approximate salary commonly advertised for these roles, eligibility, a typical day, the systems you will learn, and how to apply safely. It is general guidance; confirm openings and terms directly.
About Eicher and Its Pithampur Base
Eicher trucks and buses are built by VE Commercial Vehicles (VECV), a joint venture of Eicher Motors Limited and the Volvo Group. Pithampur, near Indore in Madhya Pradesh, is the main manufacturing base. See the Eicher Motors official website for the group overview and the Eicher careers page for current openings.
Two Kinds of Material Work
Production Stores (Inbound to the Line)
Parts from hundreds of suppliers arrive at the plant, are checked, stored and supplied to assembly lines exactly when needed. A missing bracket can stop an entire line, so timing and accuracy matter.
Spare Parts Warehousing (Outbound to Dealers)
Spare parts for vehicles already on the road are stored, picked and packed for dealers and service centres across the country. Packing must protect parts during long truck journeys.
Anúncios
Roles Open to 10th and 12th Pass Candidates
Material Handler / Stores Helper
Unloads supplier trucks, counts boxes against documents, moves materials with trolleys and pallet jacks, and stores them in the correct locations.
Line Feeder
Delivers kits or bins of parts to assembly stations on schedule and returns empty bins.
Picker
Uses pick lists or handheld scanners to collect spare parts for dealer orders.
Packer
Packs parts with the right cartons, padding, rust protection and labels.
Inventory Assistant (12th pass preferred)
Updates stock entries, supports cycle counts and helps investigate differences.
Dispatch Loader
Sorts packed cartons by route and loads them onto vehicles.
Eligibility
- 10th or 12th pass; commerce or computer knowledge helps for inventory roles.
- Age typically 18 to around 30 for entry roles.
- Physically fit for lifting, walking and standing through the shift.
- Able to read part numbers, codes and basic English labels.
- Willing to work rotating shifts.
Approximate Salary
These approximate ranges reflect what is commonly advertised for similar plant stores and warehouse roles – they are not official Eicher or VECV figures. Pay differs for company trainees and contractor staff.
| Category | Approximate Monthly Salary |
|---|---|
| 10th pass jobs | ₹17,000 – ₹22,000 |
| 12th pass jobs | ₹19,000 – ₹27,000 |
| Helper jobs | ₹19,000 – ₹27,000 |
| Warehouse and packing | ₹19,000 – ₹27,000 |
| Technical (ITI/diploma, for comparison) | ₹22,000 – ₹35,000 |
Make sure PF and ESI deductions appear on your salary slip. ESI provides medical cover – details on the ESIC website.
Key Warehouse Terms You Will Hear
| Term | Meaning |
|---|---|
| GRN | Goods Receipt Note – the record that material has been received |
| FIFO | First In, First Out – older stock is used or shipped first |
| Bin location | The exact rack and shelf address of a part |
| Cycle count | Counting a few locations every day to keep stock accurate |
| Kitting | Grouping all parts needed for one vehicle or station into a kit |
| Kanban | A card or signal system that triggers refilling of parts |
| Pick list | List of parts to be collected for an order |
Learning these terms before your interview shows you are serious and makes training easier.
A Typical Day in Production Stores
The morning shift starts with a safety briefing and a look at the day’s production plan – how many trucks or buses of each model will be built. Supplier vehicles arrive; you unload, check quantities against the invoice, report shortages or damage, and help complete the receipt entry. Parts are moved to their bin locations. Meanwhile line feeders follow a fixed route, dropping full bins at stations and collecting empties that signal what needs refilling. Around midday, cycle counts are done on a few racks. The shift ends with cleaning the area, parking equipment correctly and handing over any open issues.
A Typical Day in Spare Parts Packing
Dealer orders arrive through the system and are released as pick lists. Pickers collect parts – from small filters and bulbs to heavy brake drums – and bring them to packing stations. Packers check part numbers, apply rust protection where required, choose cartons, add padding, seal and label them. Dispatch staff group cartons by route and load them before transport cut-off times.
Packing Heavy and Delicate Truck Parts
Spare parts for commercial vehicles come in every shape and weight, and each needs the right packing so it reaches a dealer in usable condition:
- Brake drums, discs and springs: heavy and oily – pack on pallets or in strong cartons, strap securely, and label as heavy.
- Filters and small engine parts: easy to mix up; double-check part numbers against the pick list before sealing.
- Glass, mirrors and lamps: fragile – use corner protectors, bubble wrap and “fragile” markings.
- Machined parts: apply rust protection or VCI wrap as instructed, since some parts travel long distances in humid weather.
- Rubber parts and seals: keep away from heat and sharp objects; do not crush them under heavy items.
A dealer who receives a damaged or wrong part loses time and money, and so does the customer whose truck is waiting. That is why packers who are careful and consistent are valued.
Common Mistakes New Stores Staff Make
- Storing a part in a nearby empty slot instead of its correct bin location.
- Not recording a shortage or damage at receipt, which later looks like a stock loss.
- Ignoring FIFO and shipping new stock while older stock ages.
- Mixing similar-looking parts with different numbers.
- Rushing near forklifts or walking outside marked paths.
Interview Questions You May Face
“What will you do if the quantity received is less than the invoice?”
Recount, note the difference on the receipt, and inform the supervisor before signing or completing the entry.
“What does FIFO mean?”
First In, First Out – the oldest stock is used or dispatched first.
“How will you make sure you pick the correct part?”
Match the full part number and description, scan where available, and double-check quantity.
“Are you ready for night shifts?”
Answer honestly; warehouses often run round the clock during busy periods.
Safety Rules in Stores and Warehouses
- Safety shoes and high-visibility vests near forklift zones.
- Lift with your legs; use pallet jacks or ask for help with heavy parts like drums and springs.
- Never stand under raised forks or climb racks.
- Only trained and authorised staff drive forklifts.
- Keep aisles clear and report damaged racks immediately.
Production Stores vs Spare Parts Warehouse: Which Suits You?
| Point | Production Stores | Spare Parts Warehouse |
|---|---|---|
| Main customer | Assembly line inside the plant | Dealers and service centres |
| Pace | Tied to line speed; delays stop production | Tied to dispatch cut-off times |
| Typical tasks | Receiving, kitting, line feeding | Picking, packing, dispatch |
| Best for | People who like fixed routines and timing | People who are careful with details and packing |
Terms to Confirm Before You Join
- Employer on paper: company, trainee scheme or logistics contractor.
- In-hand salary, salary date and overtime rules.
- Shift timings and transport from Indore or nearby towns.
- Canteen facility and safety shoes or uniform provided.
- PF and ESI registration and when deductions start.
How to Apply
- Check the Eicher careers page for openings and trainee schemes.
- Search stores, warehouse and logistics roles in Pithampur and Indore on the National Career Service portal.
- Many material-handling roles are staffed through logistics partners and contractors – verify the firm name and never pay anyone.
- Attend district employment fairs announced in Indore and Dhar.
Selection Process
Basic Test
Simple arithmetic, reading part numbers and matching codes.
Physical Check
Lifting or carrying tasks for handler roles.
Interview
Questions on shifts, reliability and accuracy.
Medical and Documents
Fitness check and certificate verification.
Documents Required
- Aadhaar card (keep details updated via UIDAI) and PAN card
- 10th/12th mark sheets
- Bank passbook or cancelled cheque
- Passport-size photos
- Experience letter, if any
Growth Path
Reliable handlers become senior associates, then team leaders or stores supervisors. Those who learn inventory systems and Excel can move into planning or inventory control. A forklift operator licence and training can add to your pay and options. Free courses in logistics, warehousing and computers are available on the Skill India Digital Hub. For information on wages and rights, see the Ministry of Labour and Employment website.
Stores experience at a vehicle maker is also useful at e-commerce warehouses, auto-component suppliers and dealership parts counters, so the skills you learn here travel well if you move to another company or city later.
Beware of Fake Offers
Fake “packing jobs” and “warehouse jobs with free room” are common scams. No genuine employer or registered contractor charges for jobs, gate passes or uniforms. Report fraud on cybercrime.gov.in or call 1930.
Frequently Asked Questions
Do I need ITI for Eicher stores or packing jobs?
No, many stores, packing and helper roles accept 10th or 12th pass candidates.
What is the approximate salary for a packer?
Commonly advertised ranges for similar warehouse and packing roles are around ₹19,000 to ₹27,000 per month; confirm your offer.
Will I have to drive a forklift?
Only if trained and authorised. Entry roles use trolleys and hand pallet jacks.
Are computer skills needed?
Basic smartphone skills are enough for most roles; inventory roles benefit from computer knowledge.
Are these contract or company jobs?
Both routes exist. Ask which applies and check your appointment letter.
Can women apply for stores and packing roles?
Yes. Many plants and warehouses hire women for picking, packing, kitting and inventory work. Ask about shift timings, transport and facilities during the interview.
Final Thoughts
Stores and spare parts work keeps Eicher’s lines running and its trucks on the road. For 10th and 12th pass candidates around Indore and Pithampur, it is a practical way into the automobile industry with a clear path to supervision. Stay accurate, stay safe, and apply only through genuine channels.
Disclaimer
This article is for general information only. careers.paperlessloan.in is not affiliated with Eicher Motors, VE Commercial Vehicles or the Volvo Group and does not recruit on their behalf. Salaries and roles are approximate; verify details with the employer and in your written offer.
